Yamaha MG12 Ex Demo

12-Channel Mixing Console: Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo) / 2 GROUP Buses + 1 Stereo Bus / 2 AUX (incl. FX)

Ex-Demo

• 12-Channel Mixing Console
• Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo)
• 2 GROUP Buses + 1 Stereo Bus
• 2 AUX (incl. FX)
• “D-PRE” mic preamps with an inverted Darlington circuit
• 1-Knob compressors
• PAD switch on mono inputs
• +48V phantom power
• XLR balanced outputs
• Internal universal power supply for world-wide use
• Optional Rack Mount Kit RK-MG12 Available
• Metal chassis
• 308 mm x 118 mm x 422 mm (12.1" x4.6" x16.6")
• Net Weight: 4.0 kg (8.8 lbs.)

Technical Specifications

Total harmonic distortion:0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min
Hum & noise level:Equivalent input noise:-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Hum & noise level:Residual output noise:-102 dBu (STEREO OUT, STEREO master fader: Min)
Crosstalk:-78 dB
Power requirements:AC 100 – 240 V, 50 / 60 Hz
Dimensions:W:308 mm (12.1")
Dimensions:H:118 mm (4.6")
Dimensions:D:422 mm (16.6")
Net weight:4.0 kg (8.8 lbs.)
Accessories:Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Optional Accessory: Rack-mount kit RK-MG12
I/O::Phantom power:+48 V
Frequency response:+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Power consumption:22 W
Others:Operating Temperature: 0 to +40˚C
Bus:Stereo: 1, GROUP: 2, AUX: 2
Input Channel Function:PAD:26 dB (Mono)
Input Channel Function:HPF:80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
Input Channel Function:COMP:1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec
Input Channel Function:EQ HIGH:Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
Input Channel Function:EQ MID:Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking
Input Channel Function:EQ LOW:Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
Input Channel Function:PEAK LED:LED turns on when post EQ signal reaches 3 dB below clipping
Input Channel Function:Level Meter:2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]
Input Channels:Mono[MIC/LINE]:4
Input Channels:Mono/Stereo[MIC/LINE]:2
Input Channels:Stereo[LINE]:2
Output Channels:STEREO OUT:2
Output Channels:MONITOR OUT:1
Output Channels:PHONES:1
Output Channels:AUX SEND:2
Output Channels:GROUP OUT:2