Magewell Pro Convert HDMI TX

• Supports up to 2048x1200 60fps input signals
• Connects existing source equipment into NDI-enabled, IP-based media networks
• Plug-and-play ease of use with automatic input format detection and DHCP network configuration

Pro Convert HDMI TX Specificationsdocument Download

Input Features

Max video input: 2048x1200 60fps 4:4:4/4:2:2

Input video at any format by custom EDID of input port

Video formats: RGB, YUV BT.601/709/2020

8-channel HDMI-embedded audio

HDMI interface: HDMI 1.4, DVI-D

NDI® Encoding Features

Encoding Full NDI real-time stream at up to 2048x1200 60fps 4:2:2 8-bit.

Output the same resolution as input or any custom resolution. Typical outputs include:

2048x1080p/1920x1080p 23.98/24/25/29.97/30/50/59.94/60

1920x1080i 25/29.97/30/50/59.94/60

1280x720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120

720x480p/720x480i 59.94/60/119.88/120

720x576p/720x576i 50/100

Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate

Encoding 2-channel NDI-embedded audio

Support NDI 4.x

Web UI Management

Provide comprehensive information regarding the device and input signals in real-time

Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection

Update firmware

Support USB RNDIS/ECM

Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers

Provide HTTP APIs

On-board Control Buttons

16 Position Rotary DIP Switch: set board-index from 0 to F

PTZ Control

Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI

Mini-DIN–8 jack (shared with Tally light)

Network Interfaces

10/100/1000Mbps Ethernet

IEEE 802.3af PoE

USB Interface

USB2.0 Type B

5V/2.1A power supply

USB RNDIS/ECM

Supported Products

NDI Studio Monitor

OBS

vMix

Any other NDI-enabled product

LED Indicators

Status LEDs indicate:

Power supply: on/off

Input signal: locked/unlocked

Form Factor

100.9smm (L) x 60.2mm (W) x 23.3mm (H)

Accessories

USB 2.0 A to B cable

5V/2.1A power adaptor

Mini-DIN 8 breakout cable

Tally light

L-bracket

Screw Mounting Hole

¼–20 threaded hole

Power Consumption

5V max current: ~1.5A

Max power consumption: ~6W

Working Environment

Operating temperature: 0 to 40 deg C

Storage temperature: –20 to 70 deg C

Relative humidity: 5% to 90% non-condensing