Stagebox DANTE Audio Network 16 IN / 8 OUT
R Series I/O racks employ Dante network audio protocol for exceptional flexibility and freedom in setup and placement, while delivering natural, musical sound that brings out the full sonic potential of mixing consoles and other system components. They also allow redundancy for the utmost reliability in any application. Four models accommodate a wide range of I/O requirements.
Sonic performance that brings out the best in any system
The “natural, musical sound” that was a key element of the CL Series design policy is carried on without compromise in the R Series. Mechanical construction, circuit board layout, power supply, grounding, and parts selection have all been executed with meticulous attention to detail and quality, combined with exhaustive performance and listening tests at each stage of development. The result is eminently natural, musical sound.
Dante network protocol contributes to greater system scalability and flexibility
The Dante network audio protocol developed by Audinate offers outstanding system scalability and flexibility. The required number of audio inputs and outputs can be placed wherever they are needed most, and the ability to implement redundant connections makes it possible to design a system that will keep going in the face of technical problems. With CL Series components a complete daisy-chained system can be easily set up without the need for network switches. Dante Controller software running on a personal computer allows flexible patching of devices on the network.
Support for CL series consoles as well as other Dante based systems
CL Series components are not the only Yamaha professional audio devices that will work with R Series I/O racks. With the Dante-MY16-AUD Mini-YGDAI card from Audinate installed, the M7CL, LS9, DME64N, and other compatible Yamaha pro audio gear can be used with Rio Series devices in capable and robust Dante network systems. The Rio3224-D, Rio1608-D, and Ri8-D head amplifiers can even be controlled directly from the interface of the M7CL, LS9, or other compatible console.
frequency rate / External : 44.1kHz: +4.1667%, +0.1%,
-0.1%, -4.0% (±200ppm)
48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)
88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)
96kHz: +4.1667%, +0.1%, -0.1%, -4.0%
Signal delay : Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz
harmonic distortion : Less than 0.05% 20Hz-20kHz@+4dBu into
600Ω, Fs=44.1kHz, 48kHz
Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz
INPUT to OUTPUT, Input Gain = Min.
response : +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output
@1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz
+0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz
Dynamic range : 108dB typ., INPUT to OUTPUT, Input Gain = Min
Crosstalk : -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.
Power requirements : US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
Power consumption : 120W
Dimensions W / H / D : 480mm (18 7/8in) / 232mm (9 1/4in) / 362mm (14 1/4in)
Net weight : 12.4kg (27.3lb)
Accessories : Dante Virtual Soundcard license sheet
Others : Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃