Nexo ID 14 I

image gallery

Description
Reviews (0)

ID14 I

130mm wide, 130mm high and 120mm front to back, the ID14i is a super-compact full range speaker employing a custom-designed coaxial driver with a 1.3″ voice coil for the 4″ LF component and a 1.4″ diaphragm for the HF motor, delivering smooth, clean sound and impressive power. The Installation version is available in black, white or custom RAL colours and features an an acoustic cloth over the front of the grille and captive 2-core cable connectivity.

Thanks to their fully symmetric design, there are there are no left or right versions of the ID14, so all speakers in the inventory can be the same. To ensure maximum versatility, the ID14 can be specified with either 100° x 100° or 90° x 140° HF dispersion.

KEY FEATURES

Compact, high-powered sound reinforcement speaker
116 dB peak SPL
Measures just 130mm W x 130mm H x 120mm D
Available in 100° x 100° and 90° x 140° HF dispersion versions
IP55-rated installation version with 2-core cable connectivity
Black, white and custom RAL colours

SPECIFICATIONS

Frequency Response @-6 dB	120 Hz to 20 kHz
Sensitivity 1W@1m	95 dB
Peak SPL@1m	116 dB
Available Crossover Frequencies	120, 150 Hz
HF Dispersion (upon ordering)	100° x 100° or 90° x 140°
Nominal Impedance	16 Ohms
Recommended Power	110 to 180 Watts / 16 Ohms (requires a 220 to 360 Watts / 8 Ohms ampliﬁer)

FEATURES

Number of ways	2 ways passive
Components	1 x Coaxial Neodymium LF 4” long excursion & HF 1.4“ diaphragm
Connectors	1 x Cable gland with 2 cores cable
Rigging points	1 x M10 on each side for dedicated U bracket + 2 x M6 / 73 mm pitch at the back
Construction	Polyurethane
Finish	Black: Raw sandblasted polyurethane / White: Structural paint
Front Finish	UV Resistant acoustic fabric fitted Magnelis® front grill
Operating temperature range	0°C - 40 °C (32° F - 104° F)
Storage temperature range	-20 °C - 60 °C (-4 ° F - 140° F)
Height x Width x Depth	130 mm x 130 mm x 120 mm (5.1” x 5.1” x 4.7”)
Weight: Net	1.7 kg (3.7 lbs)

System Operation
Recommended powering solution	DTDcontroller + DTDAMP4x0.7 : up to 4 x ID14 per channel
Optional powering solution	DTDcontroller + DTDAMP4x1.3 : up to 4 x ID14 per channel
	NXAMP4x1mk2 Powered TDcontroller: up to 8 x ID14 per channel
	NXAMP4x2mk2 Powered TDcontroller: up to 8 x ID14 per channel
	NXAMP4x4mk2 Powered TDcontroller: up to 8 x ID14 per channel