DAP CA-4500 DSP

The DAP CA-series Compact Amplifiers are exactly that! A very compact housed power amplifier with all the necessary features for the contemporary users. Within the family of 4 there are two straight forward 2-channel models of different amplifier power, one 3-channel model which has an included crossover to easily setup a 2.1 configuration, and one 4-channel model which also includes a crossover.

The DAP Audio CA-4500 DSP amplifier is a 4 x channel high power digital amplifier featuring 500 W per channel into 4Ω. In bridge mode it becomes a stereo amplifier delivering 1000 W per channel. Besides this it also can drive 70V and 100V line output which can be selected in the menu. The CA-4500 includes a powerful DSP where all parameters can be edited via a built-in OLED screen with an encoder or via a PC using the software editor. DSP functions include 8 band EQ, noise gate, compressor and delay with temperature setting. Working modes and channel routing are also available and can be edited easily as other DSP parameters. The CA-4500 is very compact (1U rack) and light (8kg), so it is a perfect amplifier for high power fixed or mobile applications.Specifications: Output Power
4ch 2Ohm: Not Allowed
4ch 4Ohm: 4x 500 Watt RMS
4ch 8Ohm: 4x 250 Watt RMS
Bridge 2Ohm: Not Allowed
Bridge 4Ohm: Not Allowed
Bridge 8Ohm: 2x 1000 Watt RMS
Frequency Response: 20Hz – 20KHz, +0/-1dB
THD: <0.15%
S/N rate: >96 dB A-weighted
Crosstalk: >60dB
Damping Factor: >180
Gain: 34db
Input Sensitivity: 0,9-1,1V (+/-1dBv)
Input Impedance: 20kOhm balanced, 10kOhm unbalanced
Output Mode: 4-channel / Stereo / Bridged
Amp Technology: Class D
Power Supply: SMPS
Protection: Clip Limiter
Short Circuit
Overheat
Overload
Ultrasonic
DC Voltage
Soft Start
Cooling: Forced-air by axial fan
Airflow: Front to back
Input Connectors: 3-pin XLR
Output Connectors: Speakon
Power Connector: IEC
Input Voltage: 210~240VAC… 50/60Hz
Power Consumption: 1100W
Dimensions: 483x285x44,5mm (WxDxH)
Installation depth: 285mm (excl. conn.)
Weight: 5,9Kg